HORIZONTAL/INCLINE CONVEYOR
The C1300/C1330 (hopper version) conveyor belt is a versatile solution that can be easily adapted to changing production requirements thanks to a robust, patented, simple and precise tilt adjustment system.
Added to this is the possibility of height adjustment by means of galvanised tubular steel legs and die-cast aluminium brackets with hinges that guarantee maximum safety and stability.
The traction of the roller on the belt is excellent thanks to a special finish of the drive roller and an effective tightening system, both of which are patented, guaranteeing maximum grip, eliminating any possibility of slipping and less belt wear.
The high level of engineering of this series guarantees easy customisation thanks to a wide range of accessories and standardised solutions.
The quality of the components used guarantees excellent reliability over time.
|
C1300 horizontal/incline conveyor without hopper |
|
|
Dimensions |
PO/PZ: from 500 mm / to 3500 mm (50mm increment) |
|
PI angle adjustment |
15°÷60°, 7.5° increment |
|
Frame |
118×26 mm anodized extruded aluminium profile |
|
Sponde |
H60 mm anodized extruded aluminium profile |
|
Stand support |
die cast aluminium alloy brackets with hinges (0° ÷ 60° incline adjustment range, 7.5° increment) |
|
Belt |
PVC super grip belt green |
|
Drive |
direct pull (left side), gearbox with torque limiter, multi-tension three phases asynchronous motor 230/400Vac-50Hz-3Ph |
|
Speed |
3.4 m/minute |
|
Control panel |
on/off, E-Stop, thermal overload protection |
|
Loading |
0÷30 Kg |
|
Picture |
P/N |
Description |
 |
TRM | ON/OFF, E-Stop, thermal overload protection |
 |
IBox-S | ON/OFF, E-Stop, speed adjustment |
 |
IBox-R | ON/OFF, E-Stop, manual reverse, speed adjustment |
 |
IBox-S Plus | ON/OFF, E-Stop (manual or dry contact), speed adjustment, reverse by dry contact |
 |
GV139 | ON/OFF, E-Stop, step by step working (dry contact input to start, working time setting or working/stop time setting), speed adjustment, 2 input contacts |
|
Picture |
P/N |
Description |
 |
fix PC | Polycarbonated cover fixed on the top of the sidewalls |
 |
opening PC | Opening polycarbonate cover with hinges and handle |
 |
removable "U" shape PC | "U" shape removable polycarbonate cover |
 |
tunnel underneath frame | tunnel fixed underneath the frame |
|
Picture |
P/N |
Description |
 |
"C " series standard chute | AISI430 discharge chute with adjustable incline |
 |
Discharge hopper chute | AISI430 hopper chute with square/rectangular outlet |
 |
Two outlets pneumatic discharge chute | AISI430 two outlets pneumatic chute to feed two containers |
| |
Tailor made discharge chute | Customized discharge chute in accordance to customer need |
|
Picture |
P/N |
Description |
 |
60 straight | H60 mm anodised extruded aluminium profile |
 |
130 straight | H130 mm anodised extruded aluminium profile |
 |
210 straight | H210 mm anodised extruded aluminium profile |
 |
110/90°-20 | H110 mm bent 90° last 20 mm anodised extruded aluminium profile (to fix the polycarbonated cover) |
 |
190/90°-20 | H190 mm bent 90° last 20 mm anodised extruded aluminium profile (to fix the polycarbonated cover) |
 |
150 straight | H150 mm removable anodised extruded aluminium profile combined with H60, H130, H210 standard sidewalls, fixed by grub screws |
 |
130/90°-20 | H150 mm bent 90° last 20 mm removable anodised extruded aluminium profile (to fix the polycarbonated cover) combined with H60, H85 (C3000 series), H130, H210 standard sidewalls, fixed by grub screws |
 |
150 hopper | Removable side made of folded extruded aluminum profile for hoppers, applicable to existing standard H60, H130, H210 sides, fixed with M4 screws |
 |
Corrugated sidewall cover | aluminium corrugated sidewall cover (100 mm minimum sidewall height) |
 |
Sidewalls cover | Internal side covers in HDPE |
 |
Corner closure | Corner closure for PO/PI and PI/PZ angles for sides with a height greater than H60 mm |
|
Picture |
P/N |
Description |
 |
"H" shape vertical | |
 |
Single leg | |
 |
Stand support with "H" shape base | |
 |
Rectangular base with double "U" legs | |
 |
Pedestal base | |
 |
"L" shape offset base | |
 |
Stage base | |
 |
Double "U" stage base | |
 |
Underneath frame "T" shape supports | |
 |
Rectangular underneath frame supports | |
 |
"L" shape brackets |
|
Picture |
P/N |
Description |
|
||||||||||||
|
|
||||||||||||
|
|
||||||||||||
|
|
|||
|
|
|||
|
|
|||
|
|
Picture |
P/N |
Description |
| |
Ground skate | |
| |
Foot d=60mm | |
| |
Anchorable foot d=80mm | |
| |
Swivel wheel d=80mm | |
| |
Swivel wheel d=80mm with brake | |
| |
Wheel d=100mm | |
| |
Wheel d=100mm with brake | |
| |
Anti-vibration d=60mm |
|
Picture |
P/N |
Description |
 |
Removable C1230-C1330-C2230-C2330-C3230-C3330-C6230 | Anodized extruded aluminium hopper combined with existing standard H60, H130, H210 sidewalls, fixed by grub screws |
 |
High volume hopper | High volume AISI304 hopper |
 |
Bumper |
|
Picture |
P/N |
Description |
 |
Side | Standard direct drive |
 |
Underneath frame | Belting drive |
 |
Into the frame | Idrive brushless |
 |
Oil drip tray | Steel oil drip tray fixed under the gearbox |
HORIZONTAL CONVEYOR
Dimensions
PO from 500 mm / to 7000 mm
UT from 190 mm / to 790 mm
Frame
anodized extruded aluminium profile, die cast aluminium alloy head supports
Sidewalls
anodized extruded aluminium profile
Stand supports
Galvanised steel brackets, galvanized tubular steel legs, levelling feet
Belt
PU matt blue colour surface
Drive
direct pull (left side), multi-tension three phases asynchronous motor 230/400Vac-50Hz-3Ph
Speed
3.4 m/minute
Control
on/off, E-Stop, thermal overload protection
Incline conveyor
C1200 incline conveyor without hopper
C1230 incline conveyor with hopper
Dimensions
PI from1000 mm / to 7000 mm
UT from 190 mm / to 790 mm
Frame
anodized extruded aluminium profile, die cast aluminium alloy head supports
Sidewalls
anodized extruded aluminium profile
Stand supports
die cast aluminium alloy brackets with hinges, galvanized tubular steel legs, castors with/without brake (2+2)
Belt
PVC belt petrol green quadrangular pattern
Drive
direct pull (left side), multi-tension three phases asynchronous motor 230/400Vac-50Hz-3Ph
Speed
3.4 m/minute
Control
on/off, E-Stop, thermal overload protection
HORIZONTAL/INCLINE CONVEYOR
Dimensions
PO from 500 mm / to 3500 mm
PI from 800 mm / to 3500 mm
UT from 190 mm / to 640 mm
Frame
anodized extruded aluminium profile, die cast aluminium alloy head supports and hinges
Sidewalls
anodized extruded aluminium profile
Stand supports
die cast aluminium alloy brackets with hinges, galvanized tubular steel legs, castors with/without brake (2+2)
Belt
PU matt blue colour surface
PU transport profiles
Drive
direct pull (left side), multi-tension three phases asynchronous motor 230/400Vac-50Hz-3Ph
Speed
3.4 m/minute
Control
on/off, E-Stop, thermal overload protection
HORIZONTAL CONVEYOR
Dimensions
PO from 500 mm / to 3000 mm
UT from 50 mm / to 500 mm
Frame
anodized extruded aluminium profile, die cast aluminium alloy head supports
Belt
PU matt blue colour surface
Drive
direct pull (left side), multi-tension three phases asynchronous motor 230/400Vac-50Hz-3Ph
Velocità
4.5 m/minuto
P.I. 00855480125 | Cap. Soc. € 1.560.000 i.v. | Registro Imprese di VARESE | Codice Fiscale 05970930151 | R.E.A. di VARESE n. 184602
